Home > Purchase Products Online > Bullet Proof Diesel Parts >

BulletProof FICM Power Supply, Ford 6.0L Diesel

BulletProof Ford 6.0L FICM Power Supply
BulletProof FICM Power Supply


 
Alternative Views:


BULLETPROOF FICM POWER SUPPLY

  • AN UPGRADED CIRCUIT BOARD THAT IS STRONGER AND ALLEVIATES COMPONENT OVERHEATING
  • HIGH QUALITY, MILITARY GRADE ELECTRICAL COMPONENTS
  • AN ALL-BILLET, ANODIZED ALUMINUM CASE WITH ADDITIONAL HEAT FINS TO BETTER DISSIPATE HEAT
  • INCLUDES BILLET INSPECTION COVER WITH O-RING FOR BETTER LOOK AND BETTER SEAL
  • TORX BIT TOOLS ARE REQUIRED FOR THIS JOB AND ARE AVAILABLE. Buy Torx Tools
Starting From $520.74


Availability: Usually Ships in 24 to 48 Hours
Product Code: BPDFICMUPGRADE

FICM Pin Layout


FICM Phase


Color



 
Description
 
Product Manual Warranty Related Tools Vehicle Manual Videos Magazine Articles

The BulletProof FICM is an upgraded power supply which is now available in both a 4-phase or 6-phase version. The BulletProof FICM also comes with an all-billet aluminum housing for improved heat dissipation and an updated look.

The 4- and 6-phase versions of the BulletProof FICM power supply feature a much thicker, vibration-resistant printed circuit board, military grade electrical components, a full board heat-sink and strong circuit board construction. While the 4-phase version is a greatly improved upgrade of the 4-phase OEM power supply, the 6-phase version of the BulletProof FICM features two additional circuits that share the work load with the other four. The improved circuitry and upgraded components - combined with additional circuits - means this power supply is worthy of the name Bullet Proof Diesel.

The 6-phase version of the board has user selectable settings to increase the voltage output to either 53 or 58 volts, up from the standard 48 volts.

The BulletProof FICM does NOT need to be programmed because this product is JUST the power supply portion of the FICM, not the entire FICM. The entire FICM consists of two parts: the logic board and the power supply. The logic board seldom fails and it is the part with the programming on board. The power supply half of the FICM fails 9/10 times (according to Ford) and this portion of the FICM does not need to be programmed.

Early testing results have revealed unexpected positive side effects. These side effects experienced by other customers include increased fuel economy, faster starting, overall performance increases, better cold driveability and the overcoming of fuel injector stiction.


This BulletProof FICM is the POWER SUPPLY ONLY. This product will require you to swap out your power supply on your FICM. This is easy to do and is explained in the installation manual available. Click on the link above for this information.

A new billet FICM Cover is included with this product at no additional charge.


Featured in this Magazine

DieselPower magazine
Bullet Proof 6.0 FICM, Dec 2013

Need help with this product? Call 1-888-967-6653 or 480-247-2331



Average Customer Review: 5 of 5 Total Reviews: 307 Write a review.

  0 of 0 people found the following review helpful:
 
Super products August 14, 2019
Reviewer: Jerry Smith from Anchor Point, AK United States  
Fit like a glove ..went from 42 volts to 48.5

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
SUPER DUTY Dually dreams! July 22, 2019
Reviewer: Jerry A. from Escondido, CA United States  
Had the classic symptoms of my FICM going bad,(low Circuit on all injectors, engine light on, ect.)  called up Bulletproof Diesel spoke to Andrew and I ordered the upgraded power supply. Super impressed with the quality of product! Installed my self fires up like a champ no engine light.
Thanks Andrew and all the Bulletproof diesel
Guys.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Excellent Service July 8, 2019
Reviewer: Ralph Canina from Boston, MA United States  
Dependable and great customer service.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
June 26, 2019
Reviewer: Steve Ignatow from Livermore, CA United States  
As always delivered by the time promised without a problem

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
6 Phase FICM June 3, 2019
Reviewer: Lance Poruchnek from Calgary, AB Canada  
Great Product Great quality i set the FICM to 53 volts and truck is starting better and idles better.

Was this review helpful to you?

View All Customer Reviews