Home > Purchase Products Online > Bullet Proof Diesel Parts >

[ ] BulletProof FICM Power Supply, Ford 6.0L Diesel
BulletProof Ford 6.0L FICM Power Supply
BulletProof FICM Power Supply


 
Alternative Views:


BULLETPROOF FICM POWER SUPPLY

  • AN UPGRADED CIRCUIT BOARD THAT IS STRONGER AND ALLEVIATES COMPONENT OVERHEATING
  • HIGH QUALITY, MILITARY GRADE ELECTRICAL COMPONENTS
  • AN ALL-BILLET, ANODIZED ALUMINUM CASE WITH ADDITIONAL HEAT FINS TO BETTER DISSIPATE HEAT
  • INCLUDES BILLET INSPECTION COVER WITH O-RING FOR BETTER LOOK AND BETTER SEAL
  • TORX BIT TOOLS ARE REQUIRED FOR THIS JOB AND ARE AVAILABLE. Buy Torx Tools
Starting From $495.95

Availability: Usually Ships in 24 to 48 Hours
Product Code: BPDFICMUPGRADE

FICM Pin Layout


FICM Phase


Color



 
Description
 
Product Manual Warranty Related Tools Vehicle Manual Videos Magazine Articles

The BulletProof FICM is an upgraded power supply which is now available in both a 4-phase or 6-phase version. The BulletProof FICM also comes with an all-billet aluminum housing for improved heat dissipation and an updated look.

The 4- and 6-phase versions of the BulletProof FICM power supply feature a much thicker, vibration-resistant printed circuit board, military grade electrical components, a full board heat-sink and strong circuit board construction. While the 4-phase version is a greatly improved upgrade of the 4-phase OEM power supply, the 6-phase version of the BulletProof FICM features two additional circuits that share the work load with the other four. The improved circuitry and upgraded components - combined with additional circuits - means this power supply is worthy of the name Bullet Proof Diesel.

The 6-phase version of the board has user selectable settings to increase the voltage output to either 53 or 58 volts, up from the standard 48 volts.

The BulletProof FICM does NOT need to be programmed because this product is JUST the power supply portion of the FICM, not the entire FICM. The entire FICM consists of two parts: the logic board and the power supply. The logic board seldom fails and it is the part with the programming on board. The power supply half of the FICM fails 9/10 times (according to Ford) and this portion of the FICM does not need to be programmed.

Early testing results have revealed unexpected positive side effects. These side effects experienced by other customers include increased fuel economy, faster starting, overall performance increases, better cold driveability and the overcoming of fuel injector stiction.


This BulletProof FICM is the POWER SUPPLY ONLY. This product will require you to swap out your power supply on your FICM. This is easy to do and is explained in the installation manual available. Click on the link above for this information.

A new billet FICM Cover is included with this product at no additional charge.


Featured in this Magazine

DieselPower magazine
Bullet Proof 6.0 FICM, Dec 2013

Need help with this product? Call 1-888-967-6653 or 480-247-2331



Average Customer Review: 5 of 5 Total Reviews: 282 Write a review.

  0 of 0 people found the following review helpful:
 
October 15, 2018
Reviewer: Michael Peck from Clovis, CA United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
What a difference! October 12, 2018
Reviewer: Ian McDonald from Mill Spring, NC United States  
I have been using the Scan Gauge for a while and noticed that FICM voltage was registering around 46.5V on my 2005 6.0
I ordered a 6-Phase FICM and only have it currently configured for the standard 48.0V output, but what a difference! Immediate starting from cold, more throttle response, and an improvement of 1.5mpg on the highway.  I love Bulletproof products.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great replacement September 26, 2018
Reviewer: Ronnie Griffin from Colorado Springs, CO United States  
Beefer power supply, nice case with the extra cooling ribs.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
6 Phase FICM September 26, 2018
Reviewer: Dustin Nichter from Beaverdam, VA United States  
Awesome product, and as always awesome service.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
FICM Replacement- Quality September 24, 2018
Reviewer: David Vidal from San Ramon, CA United States  
Needed to replace my FICM as voltage was dropping and hard starts. Decided to go with the upgrade as my experience with BPD product has been excellent. Sure the product comes at premium, however doing things once, save money and time and their product has proven to be "spot on".
My mechanic at  Allen Automotive in Livermore CA, installed and mentioned that build quality is far better than the other competitions FICM.

Was this review helpful to you?

View All Customer Reviews