Home > 5. Purchase Products Online > Bullet Proof Diesel Parts >

[ ] BulletProof FICM Power Supply, Ford 6.0L Diesel
BulletProof FICM
BulletProof FICM Power Supply


 
Alternative Views:


BULLETPROOF FICM POWER SUPPLY

  • AN UPGRADED CIRCUIT BOARD THAT IS STRONGER AND ALLEVIATES COMPONENT OVERHEATING
  • HIGH QUALITY, MILITARY GRADE ELECTRICAL COMPONENTS
  • AN ALL-BILLET, ANODIZED ALUMINUM CASE WITH ADDITIONAL HEAT FINS TO BETTER DISSIPATE HEAT
  • INCLUDES BILLET INSPECTION COVER WITH O-RING FOR BETTER LOOK AND BETTER SEAL
  • TORX BIT TOOLS ARE REQUIRED FOR THIS JOB AND ARE AVAILABLE. Buy Torx Tools
Starting From $495.95

Availability: Usually Ships in 24 to 48 Hours
Product Code: BPDFICMUPGRADE

FICM Pin Layout


FICM Phase


Color



 
Description
 
Product Manual Warranty Related Tools Vehicle Manual Videos Magazine Articles

The BulletProof FICM is an upgraded power supply which is now available in both a 4-phase or 6-phase version. The BulletProof FICM also comes with an all-billet aluminum housing for improved heat dissipation and an updated look.

The 4- and 6-phase versions of the BulletProof FICM power supply feature a much thicker, vibration-resistant printed circuit board, military grade electrical components, a full board heat-sink and strong circuit board construction. While the 4-phase version is a greatly improved upgrade of the 4-phase OEM power supply, the 6-phase version of the BulletProof FICM features two additional circuits that share the work load with the other four. The improved circuitry and upgraded components - combined with additional circuits - means this power supply is worthy of the name Bullet Proof Diesel.

The 6-phase version of the board has user selectable settings to increase the voltage output to either 53 or 58 volts, up from the standard 48 volts.

The BulletProof FICM does NOT need to be programmed because this product is JUST the power supply portion of the FICM, not the entire FICM. The entire FICM consists of two parts: the logic board and the power supply. The logic board seldom fails and it is the part with the programming on board. The power supply half of the FICM fails 9/10 times (according to Ford) and this portion of the FICM does not need to be programmed.

Early testing results have revealed unexpected positive side effects. These side effects experienced by other customers include increased fuel economy, faster starting, overall performance increases, better cold driveability and the overcoming of fuel injector stiction.


This BulletProof FICM is the POWER SUPPLY ONLY. This product will require you to swap out your power supply on your FICM. This is easy to do and is explained in the installation manual available. Click on the link above for this information.

A new billet FICM Cover is included with this product at no additional charge.


Featured in this Magazine

DieselPower magazine
Bullet Proof 6.0 FICM, Dec 2013

Need help with this product? Call 1-888-967-6653 or 480-247-2331



Average Customer Review: 5 of 5 Total Reviews: 265 Write a review.

  0 of 0 people found the following review helpful:
 
Definitely the right choice for a 6.0 April 10, 2018
Reviewer: Danno from West GA  
This was a great option for my 2003.  At 220k miles cold starts were getting difficult and smoke/soot were becoming an issue.  I found my factory FICM putting out 27 volts on a cold start and only climbing to 35.  This unit allowed me to keep my original logic board, retaining the existing flash and is much better built than the original power supply.  Outstanding product from a great company.  Running 58v has quieted down my injectors and increased throttle response considerably.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Outstanding March 17, 2018
Reviewer: Pioneer repair from Arizona and Maryland  
Dependable

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
48v FICM February 25, 2018
Reviewer: AP from Venice, FL  
Easy install, took about an hour, works great

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
BulletProofDiesel Stands behind their products. February 20, 2018
Reviewer: Medic Sam from Tyrone, Ga.  
I bought the 6 phase 58v FICM power supply from BDP three years ago. It just went bad 2/18. A Sunday. I emailed BPD expecting to get the run around or the sorry its out of warranty line. NOPE! They responded to me ON A SUNDAY! And had a new FICM on the way and even replaced my fuse that it blew. New FICM over nighted to me for free! Thats what I call customer service and standing behind your product! BDP has a customer for life here!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Outstanding Service and Team!!! February 18, 2018
Reviewer: G Rodg from College Station, TX  
Customer service and quality are outstanding

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

5. Purchase Products Online > Bullet Proof Diesel Parts
5. Purchase Products Online
5. Purchase Products Online > Electrical
5. Purchase Products Online > Fuel
5. Purchase Products Online > Performance
5. Purchase Products Online > VT365 International Parts
Year > 2010
Year > 2009
Year > 2008
Year > 2007
Year > 2006
Year > 2003
Year > 2004
Year > 2005
Model > F-Series
Model > Excursion
Model > E-Series
Make > Ford
Make > International
Engine > VT-365 Diesel
Engine > 6.0L Diesel
Year
Make
Engine
Model
5. Purchase Products Online > FICM