Home > Purchase Products Online > Bullet Proof Diesel Parts >

Bullet Proof Engine Oil Cooler, Factory Oil Filter, 6.0L Diesel, Standard Duty Cooler

Bullet Proof Diesel 6.0L Standard Duty Engine Oil Cooler

Alternative Views:


Starting From: $1,745.00

Availability: Usually Ships in 24 Hours

Cooler Version

Do you need an EGR Cooler?*:

Cold Weather Package

Description Technical Specs Learn More
Product Manual Warranty Related Tools Vehicle Manual Videos Magazine Articles

The Standard Duty version of cooler is the right cooler for most 6.0L diesel trucks, such as the F250 and F350 (Single Rear Wheel). This cooler runs on most of the Bullet Proof Diesel fleet of 6.0's and keeps us cool, even in Arizona, even in the summer heat. However, if you have a DRW F350, F450 or F550 - you are going to want the heavy duty option. Even if you have an F250 or F350 (Single Rear Wheel) and you tow heavy or often with your truck, then the heavy duty might be the better kit for you.

The Cold Weather Kit serves just like a coolant thermostat for the Bullet Proof Oil Cooler system. It is designed to allow your engine oil to warm up in cold weather climates before it circulates the oil through the air-to-oil cooler. Keep in mind, the Bullet Proof air-to-oil cooler is designed to work in hot summer climates like Phoenix, Arizona. This means that it will work exceedingly well in Alaska in January. Good rule of thumb? If you think you might need the cold weather kit, then you should buy it.

Featured in this Magazine

RV Magazine
Six-Liter Revival, Apr 2014

The Bullet Proof Engine Oil Cooler is not designed for tilt-cab applications.

Read This BEFORE You Order Which EGR Cooler - Round or Square?

Need help with this product? Call 1-888-967-6653 or 480-247-2331

  • No more clogged engine oil coolers due to casting sand and debris in your coolant!
  • Prevents the engine oil cooler from rupturing and filling your cooling system with engine oil.
  • Bullet Proofs the High Pressure Oil Pump (HPOP) filter screen preventing a possible HPOP failure.
  • Maximizes coolant flow to the EGR cooler to prevent it from overheating.
  • Stops early injector failure due to overheated oil.
  • Stops early engine wear due to overheated oil.
  • Stops early turbo failure due to overheated oil.
  • Prevents coolant reservoir (degas) venting coolant due to flash boiling of the coolant in the EGR cooler.
  • Finally! An engineered solution that allows you to fix your engine oil cooler right!

Do it right with these products...
6.0 Powerstroke IPR Valve Screen Kit High Pressure Oil Pump (HPOP) Connector Fitting Upgrade Kit, 2005-2007 F-Series, 2005-2010 E-Series Ford 6.0L OEM 3C3Z-9C165-AA Fuel Filter Assembly O-Ring Seal Kit Ford 6.0L OEM 6C3Z-9T515-A 2003-2006 Turbo Oil Drain Tube
Our Price: $58.19

Our Price: $65.03

Our Price: $51.17

Our Price: $51.32

Ford 6.0L Injector Pressure Regulator Screen Replacement Kit Ford OEM High Pressure Oil Pump Pressure Fitting Upgrade Kit Ford 6.0L 3C3Z-9C165-AA Fuel Filter Assembly O-Ring Seal Kit Ford 6.0L 2003-2006 Improved Turbo Oil Drain Tube
Ford Fuel Filters for 6.0L F-Series Diesel
Our Price: $83.62

Motorcraft Ford 6.0L F-Series Fuel Filters

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 19 Write a review.

  1 of 1 people found the following review helpful:
4 of 5 Great product March 10, 2018
Reviewer: FTMDiesel from Point Arena, CA  
Installed exactly as the instructions indicated. All of the parts and pieces are high quality. Nothing feels flimsy or cheap. It's a shame to hide that beautiful block off plate but well worth the peace of mind that a ruptured oil cooler will never be the reason for oil in your cooling system again. This is a product that I try to upsell whenever a 6.0 comes to my shop for an oil cooler / EGR cooler service.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Amazing product as always March 9, 2018
Reviewer: Fdchief from Chillicothe, Ohio  
As always with everything I've bought from BPD, the quality of their products is unmatched.  Only issue I had was it wasn't stated on the options when I bought it that I would need a power steering cooler relocation for my 2007  Superduty and I had to order it separate causing a minor delay in putting truck back together.  The product itself is amazing.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 External oil cooler kit December 17, 2017
Reviewer: Jjovel from Manassas VA  
The kit work perfect! Love it.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Definitely worth purchasing. May 16, 2017
Reviewer: Chris from Palm Desert, Ca.  
I installed this oil cooler myself!  the product is absolutely flawless fit and finish!! very detailed book on installation for help along the way. This product is everything I've read and done research about eot's 182-190 ects 192-196 which are down from the oem cooler I'm very pleased..!!!! which now makes those long drives a lot less stressful worrying about if my cooler is going to fail, it also makes looking at the deltas on my sct tuner a lot more pleasant. Only thing I've noticed is when my Ac is on the fan seems to run a lot more than it did, but it helps with oil flow in the external cooler more efficient I'd imagine. Hands down if your thinking about buying this external oil cooler think no more just do it!!!!!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Great quality,easy install !! March 22, 2017
Reviewer: Joe from El paso  
Install was pretty simple, everything packaged nicely. Only one issue was having to fill the oil cooler after install. That was abit frustrating but if I had an oil pump then I would have no complaint. Other then that very satisfied and so relieved knowing I will never have to replace another oil cooler ever again.. Thankyou bulletproof if only I knew about it when I did the first one lol.

Was this review helpful to you?

View All Customer Reviews