Home > Purchase Products Online >

[ ] Fan Clutch Wire Harness Saver, Ford 6.0L
Bullet Proof Diesel Ford 6.0L Fan Clutch Wire Harness Saver

Alternative Views:


Our Price: $14.95

Availability: Usually Ships in 24 Hours
Product Code: 6502051


The BulletProof Fan Clutch Harness Wire Saver is a true must-have for the Ford 6.0L. The problem occurs when the wires from the fan clutch flex and get cut/damaged by the cooling fan blades. The wires normally are safe from damage until the plastic clips on the wire harness connectors fail and break, allowing the wires to flex. This innovative product from BulletProof Diesel saves the wires and keeps them from flexing into the fan blade.

The way to think about this: a new fan clutch is going to cost well over $400 from Ford. A failed fan clutch is also going to lead to overheating problems with your 6.0L. Save yourself the grief and pain with an inexpensive wire harness saver!

Reasons to purchase the Fan Clutch Wire Harness Saver:

  • Secures in place in a minute or less
  • Protects your fan clutch wires from being destroyed by the cooling fan blades
  • Saves the expense of a new fan clutch - easily $400 or more

  • Need help with this product? Call 1-888-967-6653 or 480-247-2331

    Average Customer Review: 4.5 of 5 Total Reviews: 9 Write a review.

      0 of 0 people found the following review helpful:
    Something nice to have when disassembly of Fan October 22, 2016
    Reviewer: jmiemi from Oak Harbor, WA.  
    I ordered this because I was doing a EGR cooler, Oil Cooler and Water pump change and since I am in there might as well put that in there to forgo any later issues. I discovered that if the retainer tab is broken that there is a flat spot on each side of the connecter. So I drilled a hole on each side and zip tided it. That is actually better than the tab from the Ford factory. So no need for the harness saver unless you already have it.

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
    Fan clucth wire harness saver, Ford 6.0L June 20, 2014
    Reviewer: Hambone from Boswell Oklahoma  
    Install it on clucth replacement. Have replace clucth before and had power supply wires cut.  Very good product & holding power supply wire out of way of fan. Would have like it to be a little longer, but looks fine wonce in place.

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
    fan clutch upgrade April 1, 2014
    Reviewer: chilakil from Naples,Florida  
    Nice part, definitely will prevent cable cuting problems, i recommend it to anyone who has a 6.0 powerstroke.

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
    great product October 2, 2013
    Reviewer: krazd13 from winnemucca nv  
    Works just like it says it does

    Was this review helpful to you?

      1 of 1 people found the following review helpful:
    Excellent part! no instructions! April 18, 2012
    Reviewer: Jeff from Gasparilla Garage, FL  
    I received this with the Professional package; I can see it's benefits as I've seen the Visctronic fans fail because of the wiring.    Unfortunately the description was not noted on my paperwork and I was unable to determine where to install this item, so some documentation would help along with the Professional package.     Jeff, Gasparilla Garage

    Was this review helpful to you?

    View All Customer Reviews